HT ICOM IC-V82

Features Full sized and easy to use 7 watts output on battery NOAA Weather 200 Alphanumeric Channels Rugged MIL grade construction CTCSS/ DTCS encode/ decode with tone scan Reversible Up/ Down and Rotary Selector IC-V82 Specifications GENERAL Frequency range : Version IC-V82 USA Tx 144-148 MHz Rx 136-174 MHz * Guaranteed range 144-148MHz Europe 144-148 MHz Mode : F3E, F2D, [ F7W optional] Number of memory ch. : 207 ( 6 scan edges, 1 call) Antenna connector : BNC ( 50 ohm) Power supply : 7.2 V DC ( 6.0 — 10.3V DC acceptable, Icom' s battery pack only) Frequency stability : ± 2.5 ppm -10° C to + 60° C Current drain ( at 7.2 V DC) : IC-V82 Tx High ( 7 Watts) 2.6A Rx Max.Audio 250mA Standby 80mA Power save 30mA Usable temp. range : -10° C to + 60° C; + 14° F to + 140° F Dimensions ( projections not included) : 54( W) × 139( H) × 36.7( D) mm 21D8( W) × 515D32( H) × 17D16( D) in. Weight : 390g; 13.8oz ( with BP-222N) TRANSMITTER Output power ( at 7.2 V DC) : IC-V82 High 7.0W Mid 4.0W Low 0.5W Spurious emissions : Less than -60 dB Max. freq. deviation : ± 5 kHz/ ± 2.5 kHz ( Wide/ Narrow) Ext. MIC connector : 3-conductor 2.5( d) mm ( 1D103) / 2.2k ohm RECEIVER Receive system : Double-conversion super heterodyne Intermediate frequencies : 1st 46.35 MHz 2nd 450 kHz Sensitivity ( at 12dB SINAD) : 0.16 µ V typ. Squelch sensitivity ( at threshold) : 0.11µ V typ. Selectivity : more than 55/ 50dB ( Wide/ Narrow) typ. Inter modulation : 65dB type. Spurious and Image rejection : 80dB ( typical) Audio output power : 300 mW typ. with an 8 ohm load Ext SP connector : 3-connector 3.5 ( d) mm ( 1/ 8" ) / 8 ohm Exp Data connector : 3-connector 2.5 ( d) mm( 1/ 10"